Complete shrink wrapping kit including 17 ft. wide shrink wrap with choice of mil thickness and color. Everything you need to get started shrink wrapping is included except the heat tool - but you can add that too!
Always measure the beam of your boat before ordering shrink wrap. Using a tape measure, go from approximately 8 inches below the rub rail on one side of the boat to the highest point at the center. You will then double that number and add 2 feet. This will give you the narrowest shrink wrap that will be usable on your boat.
SHRINK WRAPPING A PONTOON BOAT: instead of tucking the shrink wrap film under the perimeter band, the shrink wrap needs to be put on the boat before the strapping. The perimeter band is then installed over the shrink wrap just below the decking. Once the perimeter band is tightened over the shrink wrap, fold the loose shrink wrap up and heat weld it over the exposed strapping.
Kit includes:- White or Blue 2" heat shrink tape (1)
- 3/4" x 300' Woven cord strapping (1)
- 3/4" buckles (10)
- Professional film knife (1)
- Ring cutter for strapping (1)
- End caps (3)
- Bottom caps (3)
- Self-adhesive vents (4)
- And your choice of shrink wrap!