Dr. Shrink Lightning Vent | Individual Vents

Dr. Shrink Lightning Vent | Individual Vents
Dr. Shrink's Self-Piercing Lightning Vent
Review this item
Retail Price: $1.90
Your Savings: $0.20
Your Price: $1.70
Availability: In Stock


Dr. Shrink's Lightning Vent provides airflow under shrink wrap to keep covered products moisture free. The New Strap and Friction Hood holds the vent in place; no need for taping. Large hood over vent opening for better weather protection and easy one-hand installation with self-piercing design. Works for both storage and transportation covers.

The self-piercing stealth vent slips directly into your finished shrink wrap project without the use of blades.  Just pierce the surface, and this stealth vent maintains an open airway for the whole storage season.

Click here for instructions on how to properly assess and ventilate your shrink wrap ventilation needs.

Looking for a case of lightning vents?  Click here!

How to Use the Lightning Vent:
  1. Pierce the shrink wrap cover (after shrinking) with the leading edge (sharp point) of the vent.
  2. Push into shrink wrap allowing it to rise up the friction hood until reaching at least 1/8" past the strap.
  3. Close and secure the strap over the shrink wrap on the friction hood and snap into place. No taping required.

Distributor information

This product is distributed by: Dr. Shrink

Related Items

Browse Similar Items

Installation Supplies | Shrink Wrap Vents