20' x 100' 4 Mil, Green Multimetal ICT Shrink Wrap - 2,000 Sq. Ft., 42 lb. Rolls

20’ x 100’ 4 mil, corrosion inhibiting protective film helps stop rust on stored machines, products, and sensitive components or equipment.  Prevent corrosive build-up with green, ICT multimetal shrink wrap designed to prep expensive items for mid to long term storage and long distance transportation including overseas ship transport, on-the-road trucking, and terminal-to-terminal flights.

This shrink film wrap provides cost-effective defense against corrosion damage on ferrous and non-ferrous metals in typical shipping and storage conditions.

Corrosion inhibiting shrink wrap does not SHRINK like traditional shrink wrap.  The film is intended to be installed as a base layer underneath our premium shrink wrap.

 Install onto, over, and into items and spaces that need a rust/corrosion inhibitor then apply traditional shrink wrap as normal.  ICT film is non-toxic, recyclable, and can protect metals for up to 5 years if properly packaged and stored.

This shrink wrap is green.

Shrink wrap can burn. If heat is applied incorrectly shrink wrap can ignite into open flame. It can also drop down onto other combustible material and cause secondary ignition and fire. If at any time you observe the shrink wrap on fire immediately stop what you are doing and carefully inspect the area where you are working for a possible fire. Keep a fire extinguisher available at all times.