Pallets of Shrink Wrap Tape for mega-users. 

Shrink Wrap Tape is for:

Note: Shrink wrap tape does not shrink. Shrink wrap tape is tape that is designed to adhere to shrink wrap after the shrink wrap has been shrunk.

When applied, shrink wrap tape should be lightly heated to warm the adhesives if it is applied in cold or damp weather.

Shrink Wrap Tape (sometimes called Heat Shrink Tape) comes in rolls that are 2", 4" or 6" wide by 180' long (also available by the case for easier handling).

Warning #1: It will not accept much heat before melting so a light warming works best. Also, when applying heat shrink tape, it should be cut, rather than ripped, so there is a smooth end that can be pressed down on the shrink wrap. The edges of the tape should also be pressed down firmly to eliminate loose edges where dirt and moisture can get under the tape and break the adhesion.

Warning #2: Heat Shrink Tape does not have UV inhibitors, and therefore is not designed to be stuck to the boat hull or painted areas, as it will leave an adhesive residue. Refer to Hull Preservation Tape for adhering shrink wrap film edges to gel coat or painted surfaces. Refer to Anti-Chafe Tape to protect delicate surfaces or Plexiglas from abrasion.

Click on any of the products below for more information. Otherwise, enter a quantity for any pallet of product you want to buy, then click "Add to Cart".