2 X 108 x 10 mil BLUE Hull Preservation Tape, with UV inhibitors.
Hull Preservation Tape has a very aggressive adhesive on it that wont leave an adhesive residue (white and blue only), plus has UV inhibitors in the backing for long term usage. This allows this tape to be stuck directly to the hull and not leave an adhesive residue when removed. This is the tape to use to adhere the edges of your shrink wrap film to the hull for transport, to prevent air from getting underneath.
When applying preservation tape it should be cut, rather than ripped, so there is a smooth end that can be pressed down on the shrink wrap. The edges of the tape should also be pressed down firmly to eliminate loose edges where dirt and moisture can get under the tape and break the adhesion.
WARNING: Preservation tape, even though it won't leave a residue behind, is very strong and can take the top layer or finish off of wood or painted surfaces. Preservation tape should be applied to a small portion of the surface to check the results.
Knife DSI-007 Professional Shrink Wrap Film Cutting Knife (approx 6"). Great for cutting shrink wrap film and the various tapes, and installing the access doors. Recessed blade greatly increases your safety. (Color may vary).
Safety Gloves Long Cuff Shrink Wrapping Safety Gloves, Pair. These are required! You are dealing with an open flame when shrink-wrapping, and backhanding of pleats may be required for good adhesion. Order a Shrink Wrap Training Video to learn the proper techniques.
