Dr. Shrink 100% virgin resin, premium small boat shrink wrap. Shipping Weight 88 lbs, Shipping size: 10 x 10 x 49. Ships by parcel (i.e. UPS/FedEx).
Shrink wrap has static that will attract dirt - Keep the shrink wrap clean and dry for best results. Rolls of shrink wrap are center slit and multi-folded. After you drape the shrink wrap film over your boat or equipment, unfold it from the center (it unfolds equally in each direction).
All rolls are on a 3 inch diameter cardboard core, so it is easy to place over a pipe for help with dispensing. Dispensers are also available for purchase: Shrink Wrap Film Roller or Heavy Duty Film Rack.
Recycle a Shrink Wrap Cover - single REBAG® Kit Dr. Shrink’s Freight Prepaid “REBAG®” Kit. Simply place your old shrink wrap in the freight prepaid, pre-addressed “REBAG®”, and hand it off to UPS to take it away for recycling.
Support Caps for TOP of Support Studs Support Pole Caps for top of support studs. These are designed to snugly fit a standard 2 x 4. They help protect your shrink wrap from being punctured by the support studs.
Support Caps (non-skid) for BOTTOM of Support Studs Support Pole Caps for the bottom of your support studs. These are designed to snugly fit a standard 2 x 4. The underside has non-skid pads to provide secure footing for the support studs.
Vent Cap: Fuel Vent Cap The Fuel Vent Cap is used to seal your fuel vent during the shrink wrapping process. After shrink wrapping, replace it with a DS-683 Passive Vent or the original fuel cap to re-allow ventilation.
