BigShrink.com is proud to work directly with Dr. Shrink to provide you with 100% virgin resin marine shrink wrap. Available in various thicknesses from 6 to 12 mils, the shrink wrap is designed to help save you time and money during the boat shrink wrap or equipment/machine shrink wrap process.
This is a proven heat shrink wrap that is used by boat builders and original equipment manufacturers, as well as individuals. It contains maximum UV inhibitors. With proper slope: rain, snow or ice will run/slide off your shrink wrap.
Dr. Shrink, Inc. is the leading supplier of premium shrink wrap and all shrink wrap installation accessories. They are noted for innovative products, prompt delivery, and experienced application advice. All of the shrink wrap is 100% virgin resin with maximum UV inhibitors. We offer the widest selection of thick mil shrink wrap, along with specialized materials including optional Flame Retardant shrink wrap.
Shrink Wrap helps protect your valuable assets from the elements: rain, snow, ice, sun, birds and dirt in general.
Blue Shrink Wrap is generally used in the snow belt to help melt snow and ice. The blue can stretch somewhat, as heat from the sun makes it pliable. Therefore, proper support is critical with the blue shrink wrap. Ventilation is highly recommended in all climates: Shrink wrap vents.
White Shrink Wrap is best for the sun belt. White remains the tightest, as it refelcts the sunrays and remains cooler. Ventilation is highly recommended in all climates: Shrink wrap vents.
Shrink Wrap Vents: Solar Powered Vents and Wind Powered Vents (in conjunction with Passive Shrink Wrap Vents) help ensure daily air flow. Desiccant and anti-mildew gas bags are recommended to help ensure protection from moisture, which can be caused by condensation. Shrink Wrap Doors allow you to periodically inspect inside, or gain access for other reasons.
SHRINK WRAP PROTECTS MANY VALUABLES: Shrink wrap protects boats and equipment from weather damage. Shrink wrap is waterproof and can be sealed around entire boats / objects to eliminate any weather related losses.
SHRINK WRAP IS EASY TO APPLY: By using the logical steps to install our shrink wrap, as shown on the shrink wrap training video, you will find it is easier to shrink wrap than tarp. Shrink Wrap is also more effective.
NO SURFACE DAMAGE: Shrink wrap will not chafe or damage covered products. When properly applied, shrink wrap will not move or chafe like heavy dirty tarps when covering loads being transported or stored.
BREATHE ABILITY: Our shrink wrap covers can be ventilated with shrink wrap vents to add air flow to help eliminate moisture and mildew problems.
EASY ACCESS: optional access doors allow entry into shrink wrap covers without cutting or removing the shrink wrap.
COST EFFECTIVE: Our durable, UV protected shrink wrap is only pennies per square foot and provides complete protection against the elements.
COMPLETE PACKAGE: we offer a complete package that simplifies and helps eliminate the problems typically associated with shipping and storage protection on all size products. The shipping department is second to none. Our products will be in your hands in the least amount of time possible.
Want to be green?
Check out the Shrink Wrap Recycling program, set up by Dr. Shrink, and available here.
Boaters and marine dealers, who want to protect the environment as much as their boats, can use the REBAG® Shrink Wrap Recycling. This innovative, environmentally friendly program allows anyone to quickly and easily recycle their used shrink wrap storage covers.
A straight forward concept, the REBAG kit consists of a 30" x 50" clear bag, with directions printed on it, prepaid UPS label, and a closure device. Boaters simply cut off the shrink wrap cover above the perimeter band, stuff it into the bag and affix the shipping label. The stuffed bags can then be dropped off at Mailboxes Etc. or a UPS service center. UPS will also pick up the full REBAGs at marinas and boatyards during regular deliveries.
Each REBAG holds approximately 600 square feet of shrink wrap. Boats over 26' require two bags. The REBAG kit can be purchased in individual units or in a roll of 50.
To learn more about shrink wrapping, please visit: Shrink Wrap FAQ
